Products

Environmental Test

Conduction Reliability Evaluation System MLR

Conduction reliability evaluation system(measurement current: AC/DC)
MLR 22

  • Micro resistance measurement system by AC/DC application (Kelvin bridge method)
  • Micro resistance (100nΩ~2k Ω)can be measure with high speed (2sec/8ch).
  • Suitable for matrix evaluation on touch panel, evaluation for lead-free solder, conductive reliability for wire harness.
  • As any value of DC current is set up to 100mA, DC voltage measurement is possible.
  • By standard T type thermocouple, PT100, temperature measurement is possible.
  • 1 board can be measured by 32CH. Maximum 8 board (maximum 256CH) can be installed main body.
MLR Specification
Measurement
resistance range
and
measurement range
AC resistance
measurement
DC resistance
measurement
DC Voltage
measurement
2.0000kΩ 100mΩ
resolution
200.00kΩ 10Ω
resolution
10.000uA 1nA
resolution
200.00 Ω 10mΩ
resolution
20.000kΩ
resolution
100.00uA 10nA
resolution
20.000 Ω 1mΩ
resolution
2.0000kΩ 100mΩ
resolution
1.0000mA 100nA
resolution
2.0000 Ω 100μΩ
resolution
200.00 Ω 10mΩ
resolution
10.000mA 1uA
resolution
200.00mΩ 10μΩ
resolution
20.000 Ω 1mΩ
resolution
100.00mA 10uA
resolution
20.000mΩ 1μΩ
resolution
2.0000mΩ 100nΩ
resolution

Inquiries about these products : ETAC Division

Click here for inquiries